Mon Nov 03, 2008 3:06 pm
All I did for mine was measured to the center of each spot the burner was going to sit and marked it on the frame. I place the T's and 90's right centered on the mark and measured the distance between the T's or 90's and that gave me the distance between each. I believe two of the pipes were ordinary sizes that can be found at Lowes or Home Depot and the other I had them custom cut and threas (no Charge just the cost of the pipe). Sorry I cant be more help than that, hopefully someone else has a drawing.
Corporal in Desert Division of The BN Army
ON TAP / BOTTLED:
FERMENTING:
ON DECK:
