Burn baby BURN

Wed Apr 27, 2011 6:48 am

Currently I have this kettle & burner:

http://www.bayouclassicdepot.com/3066a_ ... er_kit.htm

As of recently, I have decided that it takes MUCH too long to heat up water & wort. I was doing a little research, but am not familiar with BTU and things of that nature.

I know that Blichmann makes some serious brewing equipment, but I was rather intimidated by the price.

http://www.rebelbrewer.com/shoppingcart ... nding.html

I looked over at Bayou, because I figured that they had to have a better burner than what came with my kit. I found the following:

http://www.bayouclassicdepot.com/kab6-k ... r-plus.htm

I know, its only $30... However, I still have the poor college kid mentality (which I will keep until the day I die).

Can anyone tell me some pros and/or cons of these two burners?
skerrydude
 
Posts: 72
Joined: Tue Oct 26, 2010 10:09 am
Location: Delawhat?!?!

Re: Burn baby BURN

Wed Apr 27, 2011 7:07 am

Burner-wise they are about the same. I'd spend the extra $30 for the stainless hardware and the adjustable stops on the blichmann, but as far as functionality goes there is not much difference and either would be a nice burner.
PFC BN Army - 43rd Battalion Mashing Squadron
beltbuckle
 
Posts: 393
Joined: Thu Oct 08, 2009 6:19 am

Re: Burn baby BURN

Wed Apr 27, 2011 7:34 am

"Make beer not war"

Currently fermenting: Firestone Walker Pale 31 clone
Conditioning: Nothing
On draught: Nothing

Watch episodes of BYOB TV: http://www.kofytv.com/byob-tv/archive/
User avatar
BeerPal
 
Posts: 1571
Joined: Sat Jun 04, 2005 6:55 am
Location: Martinez, CA

Re: Burn baby BURN

Wed Apr 27, 2011 9:07 am

skerrydude wrote:Currently I have this kettle & burner:
http://www.bayouclassicdepot.com/3066a_ ... er_kit.htm

What burner comes with that? There might be something in between what you have and the $100 option.
Aging: Gotlandsdrickå, Baltic Porter in Bourbon barrel, Olde Ale #2 in whiskey barrel
On Draft: Nothing. Building a walk-in cooler right now.
User avatar
foomench
 
Posts: 751
Joined: Fri Jun 27, 2008 7:53 pm
Location: Longmont, CO

Re: Burn baby BURN

Thu Apr 28, 2011 5:50 am

foomench wrote:
skerrydude wrote:Currently I have this kettle & burner:
http://www.bayouclassicdepot.com/3066a_ ... er_kit.htm

What burner comes with that? There might be something in between what you have and the $100 option.




I have NO idea! It does not appear to be on their site. I can look it over this weekend and hopefully figure it out. I just do not want to wait 2 hours for heating water and wort for a brew session. Especially since I brew beers back-to-back.
skerrydude
 
Posts: 72
Joined: Tue Oct 26, 2010 10:09 am
Location: Delawhat?!?!

Re: Burn baby BURN

Fri Apr 29, 2011 9:38 am

I recently bought a new burner and did a fair amount of research. I ended up getting this one:

http://www.northernbrewer.com/brewing/b ... stand.html

It can put out crazy heat, and I can get my wort to boiling in my large 15 gal SS kettle in seemingly no time, especially compared to my previous burner (which was probably a lot like yours).

However, it does gobble propane like none other. I only get about 2 batches about of a tank, and that is with heating my mash and sparge water on my stove in the house. I've needed to place the propane tank in a big thing of hot water to keep the tank from getting too cold, the gas is coming out so fast. However, I have only used it for outdoor winter brewing, so hopefully it will be a litte more efficient when the outside temp is above freezing. Also, the base is pretty large - so if you have a kettle with a small bottom, you may lose a fair amount of heat around the kettle. Could probably deal with this by wrapping with foil or something like that.

All things being considered, I would consider getting this burner unless propane use is a major concern.

JG
JasonG
 
Posts: 19
Joined: Thu Oct 28, 2010 7:57 am

Re: Burn baby BURN

Fri Apr 29, 2011 11:16 am

I suggest spending the money on the blichmann Top Tier burner. Once you have it, you have it, I know the cost is more but this unit kicks butt. It burns fuel at a good pace when your getting you wort to boil but I think the wasted brewing time is spent waiting for the boil. I do 5 gal batches boiling 7.5 gal at flame on and this is boiling in about 11 min. After the boil starts I turn it down anyway and it don't use much fuel at that point.http://www.grapegrainandbeanstore.com/cgi/commerce.cgi?preadd=action&key=16009 sorry for the crappy picture but you know what it's about.
Puttie00
 
Posts: 24
Joined: Tue Dec 28, 2010 11:43 am
Location: Manitowoc, Wisconsin

Re: Burn baby BURN

Fri Apr 29, 2011 11:45 am

For a good while I've been using one of these, which has this burner. That's rated at 55k BTUs, and it is slow for 10 gallon batches. So I recently bought one of these, which features this burner. That's rated at 185k BTUs. I don't know how much of the difference comes from the burner and how much from the regulator, but either way that should speed up my boil. I haven't used the new one yet. I'm actually going to cut it from its stand and attach it to my brewstand, hopefully by Big Brew Day, although I might go all electric then too.
Aging: Gotlandsdrickå, Baltic Porter in Bourbon barrel, Olde Ale #2 in whiskey barrel
On Draft: Nothing. Building a walk-in cooler right now.
User avatar
foomench
 
Posts: 751
Joined: Fri Jun 27, 2008 7:53 pm
Location: Longmont, CO

Return to Brewing Equipment

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.