Mashing for 10 - 15 minutes???

Sun Jan 09, 2011 9:24 am

I just listened to the CYBI podcast for Stone Levitation Ale. Mitch Steele from Stone says the mash for that beer is a single sac rest at 157F for 10 to 15 minutes. Is this even enough time for full conversion to happen, or is the point to limit the conversion...this really doesn't make sense to me at all. Could they be adding enzymes to the mash to decrease the conversion time--he didn't mention anything about enzymes.

When Jamil gives the homebrew recipe he again says to mash at 157F, but he does not specify a length of time. I find this very odd that a home brewer would mash for this short of a period.

Am I missing something?
Drinking:
1.071 version of Tasty APA
Russian Imp Stout
Oak aged Porter w/Tart Cherries
Fermenting:
Double Chocolate Oatmeal Stout - 1.093 OG
Aging:
Belgian Dark Strong with Brett
Next up 04/17/2011
Saison
User avatar
Holt
 
Posts: 89
Joined: Fri Jul 02, 2010 6:38 am
Location: Long Beach, CA

Re: Mashing for 10 - 15 minutes???

Sun Jan 09, 2011 9:34 am

IF you go to Weyermann's site and download the specs for their malts you will see that conversion times are generally listed as 10 min min, 20 min max.
ajdelange
 
Posts: 1386
Joined: Wed May 27, 2009 9:18 am

Re: Mashing for 10 - 15 minutes???

Sun Jan 09, 2011 10:54 am

Plus, the commercial brewers tend to vorlauf for a long time, during which conversion continues until the enzymes either denature or conversion completes.
-B'Dawg
BJCP GM3 Judge & Mead
"Lunch Meat. It's an acquired taste....." -- Mylo
User avatar
BDawg
 
Posts: 4993
Joined: Tue Jul 31, 2007 5:27 pm
Location: North Bend, WA

Re: Mashing for 10 - 15 minutes???

Sun Jan 09, 2011 4:12 pm

From what I've seen, it also takes them a long time to mash in since they're dealing with more grain and, if they're using a grist hydrator, they're converting as they do it. In some cases, they might be done converting by the time they get all the grain in the mash tun.
User avatar
leaky_porch
 
Posts: 269
Joined: Fri Jan 16, 2009 12:00 pm
Location: Austin, TX

Re: Mashing for 10 - 15 minutes???

Sun Jan 09, 2011 7:21 pm

Excellent points about the commercial process, and I believe Mitch is telling the truth about the mashing process on Stone's whatever-billion-barrel equipment, but what's the translation to a standard 6 gallon batch of Levitation in an igloo mash?

Can someone really expect full conversion in 15 minutes or less?
Drinking:
1.071 version of Tasty APA
Russian Imp Stout
Oak aged Porter w/Tart Cherries
Fermenting:
Double Chocolate Oatmeal Stout - 1.093 OG
Aging:
Belgian Dark Strong with Brett
Next up 04/17/2011
Saison
User avatar
Holt
 
Posts: 89
Joined: Fri Jul 02, 2010 6:38 am
Location: Long Beach, CA

Re: Mashing for 10 - 15 minutes???

Sun Jan 09, 2011 7:54 pm

Holt wrote:Excellent points about the commercial process, and I believe Mitch is telling the truth about the mashing process on Stone's whatever-billion-barrel equipment, but what's the translation to a standard 6 gallon batch of Levitation in an igloo mash?

Can someone really expect full conversion in 15 minutes or less?


With zero time for mashing in and zero for vorlauf, no.
JohnF
 
Posts: 254
Joined: Fri Apr 23, 2010 2:25 pm

Re: Mashing for 10 - 15 minutes???

Mon Jan 10, 2011 6:01 am

Holt wrote:Can someone really expect full conversion in 15 minutes or less?


Based on Weyermann's data and my experience I would think so but no one says you have to limit yourself to 15 minutes if it makes you uncomfortable. You could, of course, do an iodine test (but be sure you are doing it correctly) at the end of 15 minutes and continue if you are not happy with the result.

I expect that the key is in getting the grain fully hydrated so that the liquor has access to the starch. Carefull and thorough mixing and being sure you are at the desired temperature should precede starting the clock. If you are still breaking up doughballs I don't think you can count on complete conversion whatever the time.

I don't know what kinematics these enzymes obey but it's probably reasonable to expect that the rate of conversion slows as starch is consumed so that the percentage conversion approches some assymptote with most of the conversion taking place early on and the rate in the last few minutes only contributes a small fraction of the total sugar.

You can get a rough idea about how conversion is going by observing that the mash becomes darker (loses it's flour suspended in water appearance) and easier to stir. It also tastes sweeter.
ajdelange
 
Posts: 1386
Joined: Wed May 27, 2009 9:18 am

Re: Mashing for 10 - 15 minutes???

Mon Jan 10, 2011 9:38 am

JohnF wrote:With zero time for mashing in and zero for vorlauf, no.



That's what I was thinking, which is why I was very surprised Jamil didn't state a mashing time for this recipe. In BCS I think all his mashes are 60 min, unless using pilsner malt then it's a 90. I'll assume this should be 157F for 60 minutes.

My friend emailed JZ for clarification, and he responded, "go listen to the podcast." Maybe Heretic should come out with "Ego Ale" as their first release--haha.
Drinking:
1.071 version of Tasty APA
Russian Imp Stout
Oak aged Porter w/Tart Cherries
Fermenting:
Double Chocolate Oatmeal Stout - 1.093 OG
Aging:
Belgian Dark Strong with Brett
Next up 04/17/2011
Saison
User avatar
Holt
 
Posts: 89
Joined: Fri Jul 02, 2010 6:38 am
Location: Long Beach, CA

Return to All Grain Brewing

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.